diff -urN multipath-0.0.16.3/ChangeLog multipath-0.0.16.4/ChangeLog --- multipath-0.0.16.3/ChangeLog 2004-02-09 11:26:16.000000000 +0100 +++ multipath-0.0.16.4/ChangeLog 2004-02-12 14:12:29.000000000 +0100 @@ -1,4 +1,12 @@ 2004-02-04 multipath-016 + * remove unused sg_err.c + * big restructuring : split devinfo.c from main.c. Export : + * void basename (char *, char *); + * int get_serial (int, char *); + * int get_lun_strings (char *, char *, char *, char *); + * int get_evpd_wwid(char *, char *); + * long get_disk_size (char *); + * stop passing struct env as param * add devmap_name proggy for udev to name devmaps as per their internal DM name and not only by their sysfs enum name (dm-*) The corresponding udev.rules line is : diff -urN multipath-0.0.16.3/Makefile multipath-0.0.16.4/Makefile --- multipath-0.0.16.3/Makefile 2004-02-09 11:21:50.000000000 +0100 +++ multipath-0.0.16.4/Makefile 2004-02-12 10:29:59.000000000 +0100 @@ -18,7 +18,7 @@ -I$(klibcdir)/klibc/include -I$(klibcdir)/klibc/include/bits32 \ -I$(GCCINCDIR) -I$(KERNEL_DIR)/include -I$(sysfsdir) -I. -OBJS = main.o +OBJS = devinfo.o main.o CRT0 = ../../klibc/klibc/crt0.o LIB = ../../klibc/klibc/libc.a LIBGCC := $(shell $(CC) -print-libgcc-file-name ) @@ -67,4 +67,4 @@ rm $(bindir)/devmap_name # Code dependencies -main.o: main.c main.h sg_include.h +main.o: main.c main.h sg_include.h devinfo.h Binary files multipath-0.0.16.3/SCCS/s..indent.pro and multipath-0.0.16.4/SCCS/s..indent.pro differ Binary files multipath-0.0.16.3/SCCS/s.AUTHOR and multipath-0.0.16.4/SCCS/s.AUTHOR differ Binary files multipath-0.0.16.3/SCCS/s.COPYING and multipath-0.0.16.4/SCCS/s.COPYING differ Binary files multipath-0.0.16.3/SCCS/s.ChangeLog and multipath-0.0.16.4/SCCS/s.ChangeLog differ Binary files multipath-0.0.16.3/SCCS/s.Makefile and multipath-0.0.16.4/SCCS/s.Makefile differ Binary files multipath-0.0.16.3/SCCS/s.README and multipath-0.0.16.4/SCCS/s.README differ Binary files multipath-0.0.16.3/SCCS/s.VERSION and multipath-0.0.16.4/SCCS/s.VERSION differ Binary files multipath-0.0.16.3/SCCS/s.main.c and multipath-0.0.16.4/SCCS/s.main.c differ Binary files multipath-0.0.16.3/SCCS/s.main.h and multipath-0.0.16.4/SCCS/s.main.h differ diff -urN multipath-0.0.16.3/SCCS/s.multipath.hotplug multipath-0.0.16.4/SCCS/s.multipath.hotplug --- multipath-0.0.16.3/SCCS/s.multipath.hotplug 2003-12-31 10:08:48.000000000 +0100 +++ multipath-0.0.16.4/SCCS/s.multipath.hotplug 1970-01-01 01:00:00.000000000 +0100 @@ -1,44 +0,0 @@ -H02957 -s 00003/00000/00003 -d D 1.3 03/12/29 02:51:02 christophe.varoqui 4 3 -c extras multipath update -cC -cF128914 -cK08465 -e -s 00001/00001/00002 -d D 1.2 03/12/29 00:20:57 christophe.varoqui 3 2 -c extras multipath update -cC -cF137719 -cK06972 -e -s 00003/00000/00000 -d D 1.1 03/12/19 15:39:42 christophe.varoqui 2 1 -c extras multipath update -cC -cF248980 -cK06996 -cO-rw-rw-r-- -e -s 00000/00000/00000 -d D 1.0 03/12/19 15:39:42 christophe.varoqui 1 0 -c BitKeeper file /home/greg/src/udev/extras/multipath/multipath.hotplug -cBgreg@kroah.com|ChangeSet|20030410173830|44862|5a456b78236181c4 -cF248979 -cHfree.fr[greg] -cK57982 -cPextras/multipath/multipath.hotplug -cR2276df117b643bf7 -cV4 -cX0x821 -cZ-08:00 -e -u -U -f e 4 -f x 0x821 -t -T -x^ -0DubA Ѐyϭ!imĿ7i#%Ol\} #gtqCz+XL y#a r 4dӷzOt].M l45y \ No newline at end of file Binary files multipath-0.0.16.3/SCCS/s.sg_err.c and multipath-0.0.16.4/SCCS/s.sg_err.c differ Binary files multipath-0.0.16.3/SCCS/s.sg_err.h and multipath-0.0.16.4/SCCS/s.sg_err.h differ Binary files multipath-0.0.16.3/SCCS/s.sg_include.h and multipath-0.0.16.4/SCCS/s.sg_include.h differ Binary files multipath-0.0.16.3/SCCS/s.unused.c and multipath-0.0.16.4/SCCS/s.unused.c differ diff -urN multipath-0.0.16.3/devinfo.c multipath-0.0.16.4/devinfo.c --- multipath-0.0.16.3/devinfo.c 1970-01-01 01:00:00.000000000 +0100 +++ multipath-0.0.16.4/devinfo.c 2004-02-12 14:08:44.000000000 +0100 @@ -0,0 +1,198 @@ +#include +#include +#include +#include +#include +#include +#include "devinfo.h" +#include "sg_include.h" + +#define FILE_NAME_SIZE 255 + +void +basename(char * str1, char * str2) +{ + char *p = str1 + (strlen(str1) - 1); + + while (*--p != '/') + continue; + strcpy(str2, ++p); +} + +static int +do_inq(int sg_fd, int cmddt, int evpd, unsigned int pg_op, + void *resp, int mx_resp_len, int noisy) +{ + unsigned char inqCmdBlk[INQUIRY_CMDLEN] = + { INQUIRY_CMD, 0, 0, 0, 0, 0 }; + unsigned char sense_b[SENSE_BUFF_LEN]; + struct sg_io_hdr io_hdr; + + if (cmddt) + inqCmdBlk[1] |= 2; + if (evpd) + inqCmdBlk[1] |= 1; + inqCmdBlk[2] = (unsigned char) pg_op; + inqCmdBlk[4] = (unsigned char) mx_resp_len; + memset(&io_hdr, 0, sizeof (struct sg_io_hdr)); + io_hdr.interface_id = 'S'; + io_hdr.cmd_len = sizeof (inqCmdBlk); + io_hdr.mx_sb_len = sizeof (sense_b); + io_hdr.dxfer_direction = SG_DXFER_FROM_DEV; + io_hdr.dxfer_len = mx_resp_len; + io_hdr.dxferp = resp; + io_hdr.cmdp = inqCmdBlk; + io_hdr.sbp = sense_b; + io_hdr.timeout = DEF_TIMEOUT; + + if (ioctl(sg_fd, SG_IO, &io_hdr) < 0) { + perror("SG_IO (inquiry) error"); + return -1; + } + + /* treat SG_ERR here to get rid of sg_err.[ch] */ + io_hdr.status &= 0x7e; + if ((0 == io_hdr.status) && (0 == io_hdr.host_status) && + (0 == io_hdr.driver_status)) + return 0; + if ((SCSI_CHECK_CONDITION == io_hdr.status) || + (SCSI_COMMAND_TERMINATED == io_hdr.status) || + (SG_ERR_DRIVER_SENSE == (0xf & io_hdr.driver_status))) { + if (io_hdr.sbp && (io_hdr.sb_len_wr > 2)) { + int sense_key; + unsigned char * sense_buffer = io_hdr.sbp; + if (sense_buffer[0] & 0x2) + sense_key = sense_buffer[1] & 0xf; + else + sense_key = sense_buffer[2] & 0xf; + if(RECOVERED_ERROR == sense_key) + return 0; + } + } + return -1; +} + +int +get_serial (int fd, char * str) +{ + char buff[MX_ALLOC_LEN + 1]; + int len; + + if (0 == do_inq(fd, 0, 1, 0x80, buff, MX_ALLOC_LEN, 0)) { + len = buff[3]; + if (len > 0) { + memcpy(str, buff + 4, len); + buff[len] = '\0'; + } + return 1; + } + return 0; +} + +int +get_lun_strings(char * vendor_id, char * product_id, char * rev, char * devname) +{ + int fd; + char buff[36]; + char attr_path[FILE_NAME_SIZE]; + char sysfs_path[FILE_NAME_SIZE]; + char basedev[FILE_NAME_SIZE]; + + if (0 == sysfs_get_mnt_path(sysfs_path, FILE_NAME_SIZE)) { + /* sysfs style */ + basename(devname, basedev); + + sprintf(attr_path, "%s/block/%s/device/vendor", + sysfs_path, basedev); + if (0 > sysfs_read_attribute_value(attr_path, + vendor_id, 8)) return 0; + + sprintf(attr_path, "%s/block/%s/device/model", + sysfs_path, basedev); + if (0 > sysfs_read_attribute_value(attr_path, + product_id, 16)) return 0; + + sprintf(attr_path, "%s/block/%s/device/rev", + sysfs_path, basedev); + if (0 > sysfs_read_attribute_value(attr_path, + rev, 4)) return 0; + } else { + /* ioctl style */ + if ((fd = open(devname, O_RDONLY)) < 0) + return 0; + if (0 != do_inq(fd, 0, 0, 0, buff, 36, 1)) + return 0; + memcpy(vendor_id, &buff[8], 8); + memcpy(product_id, &buff[16], 16); + memcpy(rev, &buff[32], 4); + close(fd); + return 1; + } + return 0; +} + +static void +sprint_wwid(char * buff, const char * str) +{ + int i; + const char *p; + char *cursor; + unsigned char c; + + p = str; + cursor = buff; + for (i = 0; i <= WWID_SIZE / 2 - 1; i++) { + c = *p++; + sprintf(cursor, "%.2x", (int) (unsigned char) c); + cursor += 2; + } + buff[WWID_SIZE - 1] = '\0'; +} + +/* get EVPD page 0x83 off 8 */ +/* tested ok with StorageWorks */ +int +get_evpd_wwid(char * devname, char * wwid) +{ + int fd; + char buff[64]; + + if ((fd = open(devname, O_RDONLY)) < 0) + return 0; + + if (0 == do_inq(fd, 0, 1, 0x83, buff, sizeof (buff), 1)) { + sprint_wwid(wwid, &buff[8]); + close(fd); + return 1; /* success */ + } + close(fd); + return 0; /* not good */ +} + +long +get_disk_size (char * devname) { + long size; + int fd; + char attr_path[FILE_NAME_SIZE]; + char sysfs_path[FILE_NAME_SIZE]; + char buff[FILE_NAME_SIZE]; + char basedev[FILE_NAME_SIZE]; + + if (0 == sysfs_get_mnt_path(sysfs_path, FILE_NAME_SIZE)) { + basename(devname, basedev); + sprintf(attr_path, "%s/block/%s/size", + sysfs_path, basedev); + if (0 > sysfs_read_attribute_value(attr_path, buff, + FILE_NAME_SIZE * sizeof(char))) + return -1; + size = atoi(buff); + return size; + } else { + if ((fd = open(devname, O_RDONLY)) < 0) + return -1; + if(!ioctl(fd, BLKGETSIZE, &size)) + return size; + } + return -1; +} + diff -urN multipath-0.0.16.3/devinfo.h multipath-0.0.16.4/devinfo.h --- multipath-0.0.16.3/devinfo.h 1970-01-01 01:00:00.000000000 +0100 +++ multipath-0.0.16.4/devinfo.h 2004-02-12 12:24:49.000000000 +0100 @@ -0,0 +1,19 @@ +#define INQUIRY_CMDLEN 6 +#define INQUIRY_CMD 0x12 +#define SENSE_BUFF_LEN 32 +#define DEF_TIMEOUT 60000 +#define RECOVERED_ERROR 0x01 +#define MX_ALLOC_LEN 255 +#define WWID_SIZE 33 +#define BLKGETSIZE _IO(0x12,96) + +/* exerpt from "sg_err.h" */ +#define SCSI_CHECK_CONDITION 0x2 +#define SCSI_COMMAND_TERMINATED 0x22 +#define SG_ERR_DRIVER_SENSE 0x08 + +void basename (char *, char *); +int get_serial (int, char *); +int get_lun_strings (char *, char *, char *, char *); +int get_evpd_wwid(char *, char *); +long get_disk_size (char *); diff -urN multipath-0.0.16.3/main.c multipath-0.0.16.4/main.c --- multipath-0.0.16.3/main.c 2004-02-05 15:10:46.000000000 +0100 +++ multipath-0.0.16.4/main.c 2004-02-12 14:10:33.000000000 +0100 @@ -28,150 +28,7 @@ #include #include "libdevmapper/libdevmapper.h" #include "main.h" - -static int -do_inq(int sg_fd, int cmddt, int evpd, unsigned int pg_op, - void *resp, int mx_resp_len, int noisy) -{ - unsigned char inqCmdBlk[INQUIRY_CMDLEN] = - { INQUIRY_CMD, 0, 0, 0, 0, 0 }; - unsigned char sense_b[SENSE_BUFF_LEN]; - struct sg_io_hdr io_hdr; - - if (cmddt) - inqCmdBlk[1] |= 2; - if (evpd) - inqCmdBlk[1] |= 1; - inqCmdBlk[2] = (unsigned char) pg_op; - inqCmdBlk[4] = (unsigned char) mx_resp_len; - memset(&io_hdr, 0, sizeof (struct sg_io_hdr)); - io_hdr.interface_id = 'S'; - io_hdr.cmd_len = sizeof (inqCmdBlk); - io_hdr.mx_sb_len = sizeof (sense_b); - io_hdr.dxfer_direction = SG_DXFER_FROM_DEV; - io_hdr.dxfer_len = mx_resp_len; - io_hdr.dxferp = resp; - io_hdr.cmdp = inqCmdBlk; - io_hdr.sbp = sense_b; - io_hdr.timeout = DEF_TIMEOUT; - - if (ioctl(sg_fd, SG_IO, &io_hdr) < 0) { - perror("SG_IO (inquiry) error"); - return -1; - } - - /* treat SG_ERR here to get rid of sg_err.[ch] */ - io_hdr.status &= 0x7e; - if ((0 == io_hdr.status) && (0 == io_hdr.host_status) && - (0 == io_hdr.driver_status)) - return 0; - if ((SCSI_CHECK_CONDITION == io_hdr.status) || - (SCSI_COMMAND_TERMINATED == io_hdr.status) || - (SG_ERR_DRIVER_SENSE == (0xf & io_hdr.driver_status))) { - if (io_hdr.sbp && (io_hdr.sb_len_wr > 2)) { - int sense_key; - unsigned char * sense_buffer = io_hdr.sbp; - if (sense_buffer[0] & 0x2) - sense_key = sense_buffer[1] & 0xf; - else - sense_key = sense_buffer[2] & 0xf; - if(RECOVERED_ERROR == sense_key) - return 0; - } - } - return -1; -} - -static void -sprint_wwid(char * buff, const char * str) -{ - int i; - const char *p; - char *cursor; - unsigned char c; - - p = str; - cursor = buff; - for (i = 0; i <= WWID_SIZE / 2 - 1; i++) { - c = *p++; - sprintf(cursor, "%.2x", (int) (unsigned char) c); - cursor += 2; - } - buff[WWID_SIZE - 1] = '\0'; -} - -static void -basename(char * str1, char * str2) -{ - char *p = str1 + (strlen(str1) - 1); - - while (*--p != '/') - continue; - strcpy(str2, ++p); -} - -static int -get_lun_strings(struct env * conf, struct path * mypath) -{ - int fd; - char buff[36]; - char attr_path[FILE_NAME_SIZE]; - char basedev[FILE_NAME_SIZE]; - - if(conf->with_sysfs) { - /* sysfs style */ - basename(mypath->sg_dev, basedev); - - sprintf(attr_path, "%s/block/%s/device/vendor", - conf->sysfs_path, basedev); - if (0 > sysfs_read_attribute_value(attr_path, - mypath->vendor_id, 8)) return 0; - - sprintf(attr_path, "%s/block/%s/device/model", - conf->sysfs_path, basedev); - if (0 > sysfs_read_attribute_value(attr_path, - mypath->product_id, 16)) return 0; - - sprintf(attr_path, "%s/block/%s/device/rev", - conf->sysfs_path, basedev); - if (0 > sysfs_read_attribute_value(attr_path, - mypath->rev, 4)) return 0; - } else { - /* ioctl style */ - if ((fd = open(mypath->sg_dev, O_RDONLY)) < 0) - return 0; - if (0 != do_inq(fd, 0, 0, 0, buff, 36, 1)) - return 0; - memcpy(mypath->vendor_id, &buff[8], 8); - memcpy(mypath->product_id, &buff[16], 16); - memcpy(mypath->rev, &buff[32], 4); - close(fd); - return 1; - } - return 0; -} - -/* hardware vendor specifics : add support for new models below */ - -/* this one get EVPD page 0x83 off 8 */ -/* tested ok with StorageWorks */ -static int -get_evpd_wwid(struct path * mypath) -{ - int fd; - char buff[64]; - - if ((fd = open(mypath->sg_dev, O_RDONLY)) < 0) - return 0; - - if (0 == do_inq(fd, 0, 1, 0x83, buff, sizeof (buff), 1)) { - sprint_wwid(mypath->wwid, &buff[8]); - close(fd); - return 1; /* success */ - } - close(fd); - return 0; /* not good */ -} +#include "devinfo.h" /* White list switch */ static int @@ -182,7 +39,7 @@ char * vendor; char * product; int iopolicy; - int (*getuid) (struct path *); + int (*getuid) (char *, char *); } wlist[] = { {"COMPAQ ", "HSV110 (C)COMPAQ", MULTIBUS, &get_evpd_wwid}, {"COMPAQ ", "MSA1000 ", MULTIBUS, &get_evpd_wwid}, @@ -208,7 +65,7 @@ if (strncmp(mypath->vendor_id, wlist[i].vendor, 8) == 0 && strncmp(mypath->product_id, wlist[i].product, 16) == 0) { mypath->iopolicy = wlist[i].iopolicy; - if (!wlist[i].getuid(mypath)) + if (!wlist[i].getuid(mypath->sg_dev, mypath->wwid)) return 0; } } @@ -269,7 +126,10 @@ basename(conf->hotplugdev, buff); sprintf(curpath.sg_dev, "/dev/%s", buff); - get_lun_strings(conf, &curpath); + get_lun_strings(curpath.vendor_id, + curpath.product_id, + curpath.rev, + curpath.sg_dev); if (!get_unique_id(&curpath)) return 0; strcpy(refwwid, curpath.wwid); @@ -301,7 +161,10 @@ basename(devp->path, buff); sprintf(curpath.sg_dev, "/dev/%s", buff); - get_lun_strings(conf, &curpath); + get_lun_strings(curpath.vendor_id, + curpath.product_id, + curpath.rev, + curpath.sg_dev); if(!get_unique_id(&curpath)) { memset(&curpath, 0, sizeof(path)); continue; @@ -349,7 +212,10 @@ strncat(file_name, buff, FILE_NAME_SIZE); strcpy(all_paths[k].sg_dev, file_name); - get_lun_strings(conf, &all_paths[k]); + get_lun_strings(all_paths[k].vendor_id, + all_paths[k].product_id, + all_paths[k].rev, + all_paths[k].sg_dev); if (!get_unique_id(&all_paths[k])) continue; @@ -484,32 +350,6 @@ } } -static long -get_disk_size (struct env * conf, char * dev) { - long size; - int fd; - char attr_path[FILE_NAME_SIZE]; - char buff[FILE_NAME_SIZE]; - char basedev[FILE_NAME_SIZE]; - - if(conf->with_sysfs) { - basename(dev, basedev); - sprintf(attr_path, "%s/block/%s/size", - conf->sysfs_path, basedev); - if (0 > sysfs_read_attribute_value(attr_path, buff, - FILE_NAME_SIZE * sizeof(char))) - return -1; - size = atoi(buff); - return size; - } else { - if ((fd = open(dev, O_RDONLY)) < 0) - return -1; - if(!ioctl(fd, BLKGETSIZE, &size)) - return size; - } - return -1; -} - static int coalesce_paths(struct env * conf, struct multipath * mp, struct path * all_paths) @@ -545,7 +385,7 @@ PINDEX(nmp,np) = k; if (mp[nmp].size == 0) - mp[nmp].size = get_disk_size(conf, all_paths[k].dev); + mp[nmp].size = get_disk_size(all_paths[k].dev); for (i = k + 1; i < conf->max_devs; i++) { if (0 == strcmp(all_paths[k].wwid, all_paths[i].wwid)) { diff -urN multipath-0.0.16.3/main.h multipath-0.0.16.4/main.h --- multipath-0.0.16.3/main.h 2003-12-23 01:37:10.000000000 +0100 +++ multipath-0.0.16.4/main.h 2004-02-12 12:10:39.000000000 +0100 @@ -28,7 +28,6 @@ #define SG_ERR_DRIVER_SENSE 0x08 /* exerpt from "scsi.h" */ -#define RECOVERED_ERROR 0x01 #define SCSI_IOCTL_GET_IDLUN 0x5382 #define SCSI_IOCTL_GET_BUS_NUMBER 0x5386 @@ -38,14 +37,9 @@ #define MAX_MP MAX_DEVS / 2 #define MAX_MP_PATHS MAX_DEVS / 4 #define FILE_NAME_SIZE 256 -#define INQUIRY_CMDLEN 6 -#define INQUIRY_CMD 0x12 -#define SENSE_BUFF_LEN 32 #define DEF_TIMEOUT 60000 #define EBUFF_SZ 256 #define TUR_CMD_LEN 6 -#define MX_ALLOC_LEN 255 -#define BLKGETSIZE _IO(0x12,96) #define DM_TARGET "multipath" /* Storage controlers cpabilities */ diff -urN multipath-0.0.16.3/sg_err.c multipath-0.0.16.4/sg_err.c --- multipath-0.0.16.3/sg_err.c 2003-12-15 22:57:35.000000000 +0100 +++ multipath-0.0.16.4/sg_err.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,1197 +0,0 @@ -#include -#include -#include -#include "sg_include.h" -#include "sg_err.h" - - -/* This file is a huge cut, paste and hack from linux/drivers/scsi/constant.c -* which I guess was written by: -* Copyright (C) 1993, 1994, 1995 Eric Youngdale - -* The rest of this is: -* Copyright (C) 1999 - 2003 D. Gilbert -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2, or (at your option) -* any later version. -* -* ASCII values for a number of symbolic constants, printing functions, etc. -* -* Some of the tables have been updated for SCSI 2. -* Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 12 18 March 2003) -* -* Version 0.91 (20030529) -* sense key specific field (bytes 15-17) decoding [Trent Piepho] -*/ - -#define OUTP stderr - -static const unsigned char scsi_command_size[8] = { 6, 10, 10, 12, - 16, 12, 10, 10 }; - -#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7] - -static const char unknown[] = "UNKNOWN"; - -static const char * group_0_commands[] = { -/* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense", -/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks", -/* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown, -/* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry", -/* 13-16 */ "Verify", "Recover Buffered Data", "Mode Select", "Reserve", -/* 17-1b */ "Release", "Copy", "Erase", "Mode Sense", "Start/Stop Unit", -/* 1c-1d */ "Receive Diagnostic", "Send Diagnostic", -/* 1e-1f */ "Prevent/Allow Medium Removal", unknown, -}; - - -static const char *group_1_commands[] = { -/* 20-23 */ unknown, unknown, unknown, "Read Format capacities", -/* 24-28 */ "Set window", "Read Capacity", - unknown, unknown, "Read (10)", -/* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase", - "Read updated block", -/* 2e-31 */ "Write Verify","Verify", "Search High", "Search Equal", -/* 32-34 */ "Search Low", "Set Limits", "Prefetch or Read Position", -/* 35-37 */ "Synchronize Cache","Lock/Unlock Cache", "Read Defect Data", -/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", - "Read Buffer", -/* 3d-3f */ "Update Block", "Read Long", "Write Long", -}; - -static const char *group_2_commands[] = { -/* 40-41 */ "Change Definition", "Write Same", -/* 42-48 */ "Read sub-channel", "Read TOC", "Read header", - "Play audio (10)", "Get configuration", "Play audio msf", - "Play audio track/index", -/* 49-4f */ "Play track relative (10)", "Get event status notification", - "Pause/resume", "Log Select", "Log Sense", "Stop play/scan", - unknown, -/* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info", - "Reserve track", "Send OPC onfo", "Mode Select (10)", -/* 56-5b */ "Reserve (10)", "Release (10)", "Repair track", "Read master cue", - "Mode Sense (10)", "Close track/session", -/* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in", - "Persistent reserve out", -}; - -/* The following are 16 byte commands in group 4 */ -static const char *group_4_commands[] = { -/* 80-84 */ "Xdwrite (16)", "Rebuild (16)", "Regenerate (16)", "Extended copy", - "Receive copy results", -/* 85-89 */ "Memory Export In (16)", "Access control in", "Access control out", - "Read (16)", "Memory Export Out (16)", -/* 8a-8f */ "Write (16)", unknown, "Read attributes", "Write attributes", - "Write and verify (16)", "Verify (16)", -/* 90-94 */ "Pre-fetch (16)", "Synchronize cache (16)", - "Lock/unlock cache (16)", "Write same (16)", unknown, -/* 95-99 */ unknown, unknown, unknown, unknown, unknown, -/* 9a-9f */ unknown, unknown, unknown, unknown, "Service action in", - "Service action out", -}; - -/* The following are 12 byte commands in group 5 */ -static const char *group_5_commands[] = { -/* a0-a5 */ "Report luns", "Blank", "Send event", "Maintenance (in)", - "Maintenance (out)", "Move medium/play audio(12)", -/* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)", - "Play track relative(12)", -/* aa-ae */ "Write(12)", unknown, "Erase(12), Get Performance", - "Read DVD structure", "Write and verify(12)", -/* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)", -/* b2-b4 */ "Search data low(12)", "Set limits(12)", - "Read element status attached", -/* b5-b6 */ "Request volume element address", "Send volume tag, set streaming", -/* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf", -/* ba-bc */ "Redundancy group (in), Scan", - "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd", -/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd", - "Volume set (out), Send DVD structure", -}; - - -#define group(opcode) (((opcode) >> 5) & 7) - -#define RESERVED_GROUP 0 -#define VENDOR_GROUP 1 - -static const char **commands[] = { - group_0_commands, group_1_commands, group_2_commands, - (const char **) RESERVED_GROUP, group_4_commands, - group_5_commands, (const char **) VENDOR_GROUP, - (const char **) VENDOR_GROUP -}; - -static const char reserved[] = "RESERVED"; -static const char vendor[] = "VENDOR SPECIFIC"; - -static void print_opcode(int opcode) { - const char **table = commands[ group(opcode) ]; - - switch ((unsigned long) table) { - case RESERVED_GROUP: - fprintf(OUTP, "%s(0x%02x)", reserved, opcode); - break; - case VENDOR_GROUP: - fprintf(OUTP, "%s(0x%02x)", vendor, opcode); - break; - default: - fprintf(OUTP, "%s",table[opcode & 0x1f]); - break; - } -} - -void sg_print_command (const unsigned char * command) { - int k, s; - print_opcode(command[0]); - fprintf(OUTP, " ["); - for (k = 0, s = COMMAND_SIZE(command[0]); k < s; ++k) - fprintf(OUTP, "%02x ", command[k]); - fprintf(OUTP, "]\n"); -} - -void sg_print_status(int masked_status) -{ - int scsi_status = (masked_status << 1) & 0x7e; - - sg_print_scsi_status(scsi_status); -} - -void sg_print_scsi_status(int scsi_status) -{ - const char * ccp; - - scsi_status &= 0x7e; /* sanitize as much as possible */ - switch (scsi_status) { - case 0: ccp = "Good"; break; - case 0x2: ccp = "Check Condition"; break; - case 0x4: ccp = "Condition Met"; break; - case 0x8: ccp = "Busy"; break; - case 0x10: ccp = "Intermediate"; break; - case 0x14: ccp = "Intermediate-Condition Met"; break; - case 0x18: ccp = "Reservation Conflict"; break; - case 0x22: ccp = "Command Terminated (obsolete)"; break; - case 0x28: ccp = "Task set Full"; break; - case 0x30: ccp = "ACA Active"; break; - case 0x40: ccp = "Task Aborted"; break; - default: ccp = "Unknown status"; break; - } - fprintf(OUTP, "%s ", ccp); -} - -/* In brackets is the related SCSI document (see www.t10.org) with the */ -/* peripheral device type after the colon */ -/* No programmatic use is made of these flags currently */ -#define D 0x0001 /* DIRECT ACCESS DEVICE (disk) [SBC-2: 0] */ -#define T 0x0002 /* SEQUENTIAL ACCESS DEVICE (tape) [SSC: 1] */ -#define L 0x0004 /* PRINTER DEVICE [SSC: 2] */ -#define P 0x0008 /* PROCESSOR DEVICE [SPC-2: 3] */ -#define W 0x0010 /* WRITE ONCE READ MULTIPLE DEVICE [SBC-2: 4] */ -#define R 0x0020 /* CD/DVD DEVICE [MMC-2: 5] */ -#define S 0x0040 /* SCANNER DEVICE [SCSI-2 (obsolete): 6] */ -#define O 0x0080 /* OPTICAL MEMORY DEVICE [SBC-2: 7] */ -#define M 0x0100 /* MEDIA CHANGER DEVICE [SMC-2: 8] */ -#define C 0x0200 /* COMMUNICATION DEVICE [SCSI-2 (obsolete): 9] */ -#define A 0x0400 /* ARRAY STORAGE [SCC-2: 12] */ -#define E 0x0800 /* ENCLOSURE SERVICES DEVICE [SES: 13] */ -#define B 0x1000 /* SIMPLIFIED DIRECT ACCESS DEVICE [RBC: 14] */ -#define K 0x2000 /* OPTICAL CARD READER/WRITER DEVICE [OCRW: 15] */ - -#define SC_ALL_DEVS ( D|T|L|P|W|R|S|O|M|C|A|E|B|K ) - -/* oft used strings are encoded using ASCII codes 0x1 to 0x1f . */ -/* This is to save space. This encoding should be UTF-8 and */ -/* UTF-16 friendly. */ -#define SC_AUDIO_PLAY_OPERATION "\x1" -#define SC_LOGICAL_UNIT "\x2" -#define SC_NOT_READY "\x3" -#define SC_OPERATION "\x4" -#define SC_IN_PROGRESS "\x5" -#define SC_HARDWARE_IF "\x6" -#define SC_CONTROLLER_IF "\x7" -#define SC_DATA_CHANNEL_IF "\x8" -#define SC_SERVO_IF "\x9" -#define SC_SPINDLE_IF "\xa" -#define SC_FIRMWARE_IF "\xb" -#define SC_RECOVERED_DATA "\xc" -#define SC_ERROR_RATE_TOO_HIGH "\xd" -#define SC_TIMES_TOO_HIGH "\xe" - - -struct error_info{ - unsigned char code1, code2; - unsigned short int devices; - const char * text; -}; - -struct error_info2{ - unsigned char code1, code2_min, code2_max; - unsigned short int devices; - const char * text; -}; - -static struct error_info2 additional2[] = -{ - {0x40,0x00,0x7f,D,"Ram failure (%x)"}, - {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"}, - {0x41,0x00,0xff,D,"Data path failure (%x)"}, - {0x42,0x00,0xff,D,"Power-on or self-test failure (%x)"}, - {0, 0, 0, 0, NULL} -}; - -static struct error_info additional[] = -{ - {0x00,0x00,SC_ALL_DEVS,"No additional sense information"}, - {0x00,0x01,T,"Filemark detected"}, - {0x00,0x02,T|S,"End-of-partition/medium detected"}, - {0x00,0x03,T,"Setmark detected"}, - {0x00,0x04,T|S,"Beginning-of-partition/medium detected"}, - {0x00,0x05,T|L|S,"End-of-data detected"}, - {0x00,0x06,SC_ALL_DEVS,"I/O process terminated"}, - {0x00,0x11,R,SC_AUDIO_PLAY_OPERATION SC_IN_PROGRESS}, - {0x00,0x12,R,SC_AUDIO_PLAY_OPERATION "paused"}, - {0x00,0x13,R,SC_AUDIO_PLAY_OPERATION "successfully completed"}, - {0x00,0x14,R,SC_AUDIO_PLAY_OPERATION "stopped due to error"}, - {0x00,0x15,R,"No current audio status to return"}, - {0x00,0x16,SC_ALL_DEVS,SC_OPERATION SC_IN_PROGRESS}, - {0x00,0x17,D|T|L|W|R|S|O|M|A|E|B|K,"Cleaning requested"}, - {0x00,0x18,T,"Erase" SC_OPERATION SC_IN_PROGRESS}, - {0x00,0x19,T,"Locate" SC_OPERATION SC_IN_PROGRESS}, - {0x00,0x1a,T,"Rewind" SC_OPERATION SC_IN_PROGRESS}, - {0x00,0x1b,T,"Set capacity" SC_OPERATION SC_IN_PROGRESS}, - {0x00,0x1c,T,"Verify" SC_OPERATION SC_IN_PROGRESS}, - {0x01,0x00,D|W|O|B|K,"No index/sector signal"}, - {0x02,0x00,D|W|R|O|M|B|K,"No seek complete"}, - {0x03,0x00,D|T|L|W|S|O|B|K,"Peripheral device write fault"}, - {0x03,0x01,T,"No write current"}, - {0x03,0x02,T,"Excessive write errors"}, - {0x04,0x00,SC_ALL_DEVS,SC_LOGICAL_UNIT SC_NOT_READY "cause not reportable"}, - {0x04,0x01,SC_ALL_DEVS,SC_LOGICAL_UNIT "is" SC_IN_PROGRESS - "of becoming ready"}, - {0x04,0x02,SC_ALL_DEVS,SC_LOGICAL_UNIT SC_NOT_READY - "initializing cmd. required"}, - {0x04,0x03,SC_ALL_DEVS,SC_LOGICAL_UNIT SC_NOT_READY - "manual intervention required"}, - {0x04,0x04,D|T|L|R|O|B,SC_LOGICAL_UNIT SC_NOT_READY "format" SC_IN_PROGRESS}, - {0x04,0x05,D|T|W|O|M|C|A|B|K,SC_LOGICAL_UNIT SC_NOT_READY - "rebuild" SC_IN_PROGRESS}, - {0x04,0x06,D|T|W|O|M|C|A|B|K,SC_LOGICAL_UNIT SC_NOT_READY - "recalculation" SC_IN_PROGRESS}, - {0x04,0x07,SC_ALL_DEVS,SC_LOGICAL_UNIT SC_NOT_READY - SC_OPERATION SC_IN_PROGRESS}, - {0x04,0x08,R,SC_LOGICAL_UNIT SC_NOT_READY "long write" SC_IN_PROGRESS}, - {0x04,0x09,SC_ALL_DEVS,SC_LOGICAL_UNIT SC_NOT_READY "self-test" - SC_IN_PROGRESS}, - {0x04,0x0a,SC_ALL_DEVS,SC_LOGICAL_UNIT - "not accessible, asymmetric access state transition"}, - {0x04,0x0b,SC_ALL_DEVS,SC_LOGICAL_UNIT - "not accessible, target port in standby state"}, - {0x04,0x0c,SC_ALL_DEVS,SC_LOGICAL_UNIT - "not accessible, target port in unavailable state"}, - {0x04,0x10,SC_ALL_DEVS,SC_LOGICAL_UNIT SC_NOT_READY - "auxiliary memory not accessible"}, - {0x05,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,SC_LOGICAL_UNIT - "does not respond to selection"}, - {0x06,0x00,D|W|R|O|M|B|K,"No reference position found"}, - {0x07,0x00,D|T|L|W|R|S|O|M|B|K,"Multiple peripheral devices selected"}, - {0x08,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,SC_LOGICAL_UNIT "communication failure"}, - {0x08,0x01,D|T|L|W|R|S|O|M|C|A|E|B|K,SC_LOGICAL_UNIT - "communication time-out"}, - {0x08,0x02,D|T|L|W|R|S|O|M|C|A|E|B|K,SC_LOGICAL_UNIT - "communication parity error"}, - {0x08,0x03,D|T|R|O|M|B|K,SC_LOGICAL_UNIT - "communication CRC error (Ultra-DMA/32)"}, - {0x08,0x04,D|T|L|P|W|R|S|O|C|K,"Unreachable copy target"}, - {0x09,0x00,D|T|W|R|O|B,"Track following error"}, - {0x09,0x01,W|R|O|K,"Tracking servo failure"}, - {0x09,0x02,W|R|O|K,"Focus servo failure"}, - {0x09,0x03,W|R|O,"Spindle servo failure"}, - {0x09,0x04,D|T|W|R|O|B,"Head select fault"}, - {0x0A,0x00,SC_ALL_DEVS,"Error log overflow"}, - {0x0B,0x00,SC_ALL_DEVS,"Warning"}, - {0x0B,0x01,SC_ALL_DEVS,"Warning - specified temperature exceeded"}, - {0x0B,0x02,SC_ALL_DEVS,"Warning - enclosure degraded"}, - {0x0C,0x00,T|R|S,"Write error"}, - {0x0C,0x01,K,"Write error - recovered with auto reallocation"}, - {0x0C,0x02,D|W|O|B|K,"Write error - auto reallocation failed"}, - {0x0C,0x03,D|W|O|B|K,"Write error - recommend reassignment"}, - {0x0C,0x04,D|T|W|O|B,"Compression check miscompare error"}, - {0x0C,0x05,D|T|W|O|B,"Data expansion occurred during compression"}, - {0x0C,0x06,D|T|W|O|B,"Block not compressible"}, - {0x0C,0x07,R,"Write error - recovery needed"}, - {0x0C,0x08,R,"Write error - recovery failed"}, - {0x0C,0x09,R,"Write error - loss of streaming"}, - {0x0C,0x0A,R,"Write error - padding blocks added"}, - {0x0C,0x0B,D|T|W|R|O|M|B,"Auxiliary memory write error"}, - {0x0C,0x0C,SC_ALL_DEVS,"Write error - unexpected unsolicited data"}, - {0x0C,0x0D,SC_ALL_DEVS,"Write error - not enough unsolicited data"}, - {0x0D,0x00,D|T|L|P|W|R|S|O|C|A|K, - "Error detected by third party temporary initiator"}, - {0x0D,0x01,D|T|L|P|W|R|S|O|C|A|K, "Third party device failure"}, - {0x0D,0x02,D|T|L|P|W|R|S|O|C|A|K, "Copy target device not reachable"}, - {0x0D,0x03,D|T|L|P|W|R|S|O|C|A|K, "Incorrect copy target device"}, - {0x0D,0x04,D|T|L|P|W|R|S|O|C|A|K, "Copy target device underrun"}, - {0x0D,0x05,D|T|L|P|W|R|S|O|C|A|K, "Copy target device overrun"}, - {0x10,0x00,D|W|O|B|K,"Id CRC or ECC error"}, - {0x11,0x00,D|T|W|R|S|O|B|K,"Unrecovered read error"}, - {0x11,0x01,D|T|W|R|S|O|B|K,"Read retries exhausted"}, - {0x11,0x02,D|T|W|R|S|O|B|K,"Error too long to correct"}, - {0x11,0x03,D|T|W|S|O|B|K,"Multiple read errors"}, - {0x11,0x04,D|W|O|B|K,"Unrecovered read error - auto reallocate failed"}, - {0x11,0x05,W|R|O|B,"L-EC uncorrectable error"}, - {0x11,0x06,W|R|O|B,"CIRC unrecovered error"}, - {0x11,0x07,W|O|B,"Data re-synchronization error"}, - {0x11,0x08,T,"Incomplete block read"}, - {0x11,0x09,T,"No gap found"}, - {0x11,0x0A,D|T|O|B|K,"Miscorrected error"}, - {0x11,0x0B,D|W|O|B|K,"Unrecovered read error - recommend reassignment"}, - {0x11,0x0C,D|W|O|B|K,"Unrecovered read error - recommend rewrite the data"}, - {0x11,0x0D,D|T|W|R|O|B,"De-compression CRC error"}, - {0x11,0x0E,D|T|W|R|O|B,"Cannot decompress using declared algorithm"}, - {0x11,0x0F,R,"Error reading UPC/EAN number"}, - {0x11,0x10,R,"Error reading ISRC number"}, - {0x11,0x11,R,"Read error - loss of streaming"}, - {0x11,0x12,D|T|W|R|O|M|B,"Auxiliary memory read error"}, - {0x11,0x13,SC_ALL_DEVS,"Read error - failed retransmission request"}, - {0x12,0x00,D|W|O|B|K,"Address mark not found for id field"}, - {0x13,0x00,D|W|O|B|K,"Address mark not found for data field"}, - {0x14,0x00,D|T|L|W|R|S|O|B|K,"Recorded entity not found"}, - {0x14,0x01,D|T|W|R|O|B|K,"Record not found"}, - {0x14,0x02,T,"Filemark or setmark not found"}, - {0x14,0x03,T,"End-of-data not found"}, - {0x14,0x04,T,"Block sequence error"}, - {0x14,0x05,D|T|W|O|B|K,"Record not found - recommend reassignment"}, - {0x14,0x06,D|T|W|O|B|K,"Record not found - data auto-reallocated"}, - {0x14,0x07,T,"Locate" SC_OPERATION " failure"}, - {0x15,0x00,D|T|L|W|R|S|O|M|B|K,"Random positioning error"}, - {0x15,0x01,D|T|L|W|R|S|O|M|B|K,"Mechanical positioning error"}, - {0x15,0x02,D|T|W|R|O|B|K,"Positioning error detected by read of medium"}, - {0x16,0x00,D|W|O|B|K,"Data synchronization mark error"}, - {0x16,0x01,D|W|O|B|K,"Data sync error - data rewritten"}, - {0x16,0x02,D|W|O|B|K,"Data sync error - recommend rewrite"}, - {0x16,0x03,D|W|O|B|K,"Data sync error - data auto-reallocated"}, - {0x16,0x04,D|W|O|B|K,"Data sync error - recommend reassignment"}, - {0x17,0x00,D|T|W|R|S|O|B|K,SC_RECOVERED_DATA - "with no error correction applied"}, - {0x17,0x01,D|T|W|R|S|O|B|K,SC_RECOVERED_DATA "with retries"}, - {0x17,0x02,D|T|W|R|O|B|K,SC_RECOVERED_DATA "with positive head offset"}, - {0x17,0x03,D|T|W|R|O|B|K,SC_RECOVERED_DATA "with negative head offset"}, - {0x17,0x04,W|R|O|B,SC_RECOVERED_DATA "with retries and/or circ applied"}, - {0x17,0x05,D|W|R|O|B|K,SC_RECOVERED_DATA "using previous sector id"}, - {0x17,0x06,D|W|O|B|K,SC_RECOVERED_DATA "without ecc - data auto-reallocated"}, - {0x17,0x07,D|W|R|O|B|K,SC_RECOVERED_DATA - "without ecc - recommend reassignment"}, - {0x17,0x08,D|W|R|O|B|K,SC_RECOVERED_DATA "without ecc - recommend rewrite"}, - {0x17,0x09,D|W|R|O|B|K,SC_RECOVERED_DATA "without ecc - data rewritten"}, - {0x18,0x00,D|T|W|R|O|B|K,SC_RECOVERED_DATA "with error correction applied"}, - {0x18,0x01,D|W|R|O|B|K,SC_RECOVERED_DATA - "with error corr. & retries applied"}, - {0x18,0x02,D|W|R|O|B|K,SC_RECOVERED_DATA "- data auto-reallocated"}, - {0x18,0x03,R,SC_RECOVERED_DATA "with CIRC"}, - {0x18,0x04,R,SC_RECOVERED_DATA "with L-EC"}, - {0x18,0x05,D|W|R|O|B|K,SC_RECOVERED_DATA "- recommend reassignment"}, - {0x18,0x06,D|W|R|O|B|K,SC_RECOVERED_DATA "- recommend rewrite"}, - {0x18,0x07,D|W|O|B|K,SC_RECOVERED_DATA "with ecc - data rewritten"}, - {0x18,0x08,R,SC_RECOVERED_DATA "with linking"}, - {0x19,0x00,D|O|K,"Defect list error"}, - {0x19,0x01,D|O|K,"Defect list not available"}, - {0x19,0x02,D|O|K,"Defect list error in primary list"}, - {0x19,0x03,D|O|K,"Defect list error in grown list"}, - {0x1A,0x00,SC_ALL_DEVS,"Parameter list length error"}, - {0x1B,0x00,SC_ALL_DEVS,"Synchronous data transfer error"}, - {0x1C,0x00,D|O|B|K,"Defect list not found"}, - {0x1C,0x01,D|O|B|K,"Primary defect list not found"}, - {0x1C,0x02,D|O|B|K,"Grown defect list not found"}, - {0x1D,0x00,D|T|W|R|O|B|K,"Miscompare during verify" SC_OPERATION}, - {0x1E,0x00,D|W|O|B|K,"Recovered id with ecc correction"}, - {0x1F,0x00,D|O|K,"Partial defect list transfer"}, - {0x20,0x00,SC_ALL_DEVS,"Invalid command" SC_OPERATION " code"}, - {0x20,0x01,D|T|P|W|R|O|M|A|E|B|K, - "Access denied - initiator pending-enrolled"}, - {0x20,0x02,D|T|P|W|R|O|M|A|E|B|K,"Access denied - no access rights"}, - {0x20,0x03,D|T|P|W|R|O|M|A|E|B|K,"Access denied - no mgmt id key"}, - {0x20,0x04,T,"Illegal command while in write capable state"}, - {0x20,0x05,T,"Obsolete"}, - {0x20,0x06,T,"Illegal command while in explicit address mode"}, - {0x20,0x07,T,"Illegal command while in implicit address mode"}, - {0x20,0x08,D|T|P|W|R|O|M|A|E|B|K,"Access denied - enrollment conflict"}, - {0x20,0x09,D|T|P|W|R|O|M|A|E|B|K,"Access denied - invalid LU identifier"}, - {0x20,0x0A,D|T|P|W|R|O|M|A|E|B|K,"Access denied - invalid proxy token"}, - {0x20,0x0B,D|T|P|W|R|O|M|A|E|B|K,"Access denied - ACL LUN conflict"}, - {0x21,0x00,D|T|W|R|O|M|B|K,"Logical block address out of range"}, - {0x21,0x01,D|T|W|R|O|M|B|K,"Invalid element address"}, - {0x21,0x02,R,"Invalid address for write"}, - {0x22,0x00,D,"Illegal function (use 20 00,24 00,or 26 00)"}, - {0x24,0x00,SC_ALL_DEVS,"Invalid field in cdb"}, - {0x24,0x01,SC_ALL_DEVS,"CDB decryption error"}, - {0x25,0x00,SC_ALL_DEVS,SC_LOGICAL_UNIT "not supported"}, - {0x26,0x00,SC_ALL_DEVS,"Invalid field in parameter list"}, - {0x26,0x01,SC_ALL_DEVS,"Parameter not supported"}, - {0x26,0x02,SC_ALL_DEVS,"Parameter value invalid"}, - {0x26,0x03,D|T|L|P|W|R|S|O|M|C|A|E|K,"Threshold parameters not supported"}, - {0x26,0x04,SC_ALL_DEVS,"Invalid release of persistent reservation"}, - {0x26,0x05,D|T|L|P|W|R|S|O|M|C|A|B|K,"Data decryption error"}, - {0x26,0x06,D|T|L|P|W|R|S|O|C|K,"Too many target descriptors"}, - {0x26,0x07,D|T|L|P|W|R|S|O|C|K,"Unsupported target descriptor type code"}, - {0x26,0x08,D|T|L|P|W|R|S|O|C|K,"Too many segment descriptors"}, - {0x26,0x09,D|T|L|P|W|R|S|O|C|K,"Unsupported segment descriptor type code"}, - {0x26,0x0A,D|T|L|P|W|R|S|O|C|K,"Unexpected inexact segment"}, - {0x26,0x0B,D|T|L|P|W|R|S|O|C|K,"Inline data length exceeded"}, - {0x26,0x0C,D|T|L|P|W|R|S|O|C|K, - "Invalid" SC_OPERATION " for copy source or destination"}, - {0x26,0x0D,D|T|L|P|W|R|S|O|C|K,"Copy segment granularity violation"}, - {0x27,0x00,D|T|W|R|O|B|K,"Write protected"}, - {0x27,0x01,D|T|W|R|O|B|K,"Hardware write protected"}, - {0x27,0x02,D|T|W|R|O|B|K,SC_LOGICAL_UNIT "software write protected"}, - {0x27,0x03,T|R,"Associated write protect"}, - {0x27,0x04,T|R,"Persistent write protect"}, - {0x27,0x05,T|R,"Permanent write protect"}, - {0x27,0x06,R,"Conditional write protect"}, - {0x28,0x00,SC_ALL_DEVS,"Not ready to ready change, medium may have changed"}, - {0x28,0x01,D|T|W|R|O|M|B,"Import or export element accessed"}, - {0x29,0x00,SC_ALL_DEVS,"Power on, reset, or bus device reset occurred"}, - {0x29,0x01,SC_ALL_DEVS,"Power on occurred"}, - {0x29,0x02,SC_ALL_DEVS,"Scsi bus reset occurred"}, - {0x29,0x03,SC_ALL_DEVS,"Bus device reset function occurred"}, - {0x29,0x04,SC_ALL_DEVS,"Device internal reset"}, - {0x29,0x05,SC_ALL_DEVS,"Transceiver mode changed to single-ended"}, - {0x29,0x06,SC_ALL_DEVS,"Transceiver mode changed to lvd"}, - {0x29,0x07,SC_ALL_DEVS,"I_T nexus loss occurred"}, - {0x2A,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Parameters changed"}, - {0x2A,0x01,D|T|L|W|R|S|O|M|C|A|E|B|K,"Mode parameters changed"}, - {0x2A,0x02,D|T|L|W|R|S|O|M|C|A|E|K,"Log parameters changed"}, - {0x2A,0x03,D|T|L|P|W|R|S|O|M|C|A|E|K,"Reservations preempted"}, - {0x2A,0x04,D|T|L|P|W|R|S|O|M|C|A|E,"Reservations released"}, - {0x2A,0x05,D|T|L|P|W|R|S|O|M|C|A|E,"Registrations preempted"}, - {0x2A,0x06,SC_ALL_DEVS,"Asymmetric access state changed"}, - {0x2A,0x07,SC_ALL_DEVS,"Implicit asymmetric access state transition failed"}, - {0x2B,0x00,D|T|L|P|W|R|S|O|C|K, - "Copy cannot execute since host cannot disconnect"}, - {0x2C,0x00,SC_ALL_DEVS,"Command sequence error"}, - {0x2C,0x01,S,"Too many windows specified"}, - {0x2C,0x02,S,"Invalid combination of windows specified"}, - {0x2C,0x03,R,"Current program area is not empty"}, - {0x2C,0x04,R,"Current program area is empty"}, - {0x2C,0x05,B,"Illegal power condition request"}, - {0x2C,0x06,R,"Persistent prevent conflict"}, - {0x2C,0x07,SC_ALL_DEVS,"Previous busy status"}, - {0x2C,0x08,SC_ALL_DEVS,"Previous task set full status"}, - {0x2C,0x09,D|T|L|P|W|R|S|O|M|E|B|K,"Previous reservation conflict status"}, - {0x2D,0x00,T,"Overwrite error on update in place"}, - {0x2F,0x00,SC_ALL_DEVS,"Commands cleared by another initiator"}, - {0x30,0x00,D|T|W|R|O|M|B|K,"Incompatible medium installed"}, - {0x30,0x01,D|T|W|R|O|B|K,"Cannot read medium - unknown format"}, - {0x30,0x02,D|T|W|R|O|B|K,"Cannot read medium - incompatible format"}, - {0x30,0x03,D|T|R|K,"Cleaning cartridge installed"}, - {0x30,0x04,D|T|W|R|O|B|K,"Cannot write medium - unknown format"}, - {0x30,0x05,D|T|W|R|O|B|K,"Cannot write medium - incompatible format"}, - {0x30,0x06,D|T|W|R|O|B,"Cannot format medium - incompatible medium"}, - {0x30,0x07,D|T|L|W|R|S|O|M|A|E|B|K,"Cleaning failure"}, - {0x30,0x08,R,"Cannot write - application code mismatch"}, - {0x30,0x09,R,"Current session not fixated for append"}, - {0x30,0x10,R,"Medium not formatted"}, /* should ascq be 0xa ?? */ - {0x31,0x00,D|T|W|R|O|B|K,"Medium format corrupted"}, - {0x31,0x01,D|L|R|O|B,"Format command failed"}, - {0x31,0x02,R,"Zoned formatting failed due to spare linking"}, - {0x32,0x00,D|W|O|B|K,"No defect spare location available"}, - {0x32,0x01,D|W|O|B|K,"Defect list update failure"}, - {0x33,0x00,T,"Tape length error"}, - {0x34,0x00,SC_ALL_DEVS,"Enclosure failure"}, - {0x35,0x00,SC_ALL_DEVS,"Enclosure services failure"}, - {0x35,0x01,SC_ALL_DEVS,"Unsupported enclosure function"}, - {0x35,0x02,SC_ALL_DEVS,"Enclosure services unavailable"}, - {0x35,0x03,SC_ALL_DEVS,"Enclosure services transfer failure"}, - {0x35,0x04,SC_ALL_DEVS,"Enclosure services transfer refused"}, - {0x36,0x00,L,"Ribbon,ink,or toner failure"}, - {0x37,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Rounded parameter"}, - {0x38,0x00,B,"Event status notification"}, - {0x38,0x02,B,"Esn - power management class event"}, - {0x38,0x04,B,"Esn - media class event"}, - {0x38,0x06,B,"Esn - device busy class event"}, - {0x39,0x00,D|T|L|W|R|S|O|M|C|A|E|K,"Saving parameters not supported"}, - {0x3A,0x00,D|T|L|W|R|S|O|M|B|K,"Medium not present"}, - {0x3A,0x01,D|T|W|R|O|M|B|K,"Medium not present - tray closed"}, - {0x3A,0x02,D|T|W|R|O|M|B|K,"Medium not present - tray open"}, - {0x3A,0x03,D|T|W|R|O|M|B,"Medium not present - loadable"}, - {0x3A,0x04,D|T|W|R|O|M|B, - "Medium not present - medium auxiliary memory accessible"}, - {0x3B,0x00,T|L,"Sequential positioning error"}, - {0x3B,0x01,T,"Tape position error at beginning-of-medium"}, - {0x3B,0x02,T,"Tape position error at end-of-medium"}, - {0x3B,0x03,L,"Tape or electronic vertical forms unit " SC_NOT_READY}, - {0x3B,0x04,L,"Slew failure"}, - {0x3B,0x05,L,"Paper jam"}, - {0x3B,0x06,L,"Failed to sense top-of-form"}, - {0x3B,0x07,L,"Failed to sense bottom-of-form"}, - {0x3B,0x08,T,"Reposition error"}, - {0x3B,0x09,S,"Read past end of medium"}, - {0x3B,0x0A,S,"Read past beginning of medium"}, - {0x3B,0x0B,S,"Position past end of medium"}, - {0x3B,0x0C,T|S,"Position past beginning of medium"}, - {0x3B,0x0D,D|T|W|R|O|M|B|K,"Medium destination element full"}, - {0x3B,0x0E,D|T|W|R|O|M|B|K,"Medium source element empty"}, - {0x3B,0x0F,R,"End of medium reached"}, - {0x3B,0x11,D|T|W|R|O|M|B|K,"Medium magazine not accessible"}, - {0x3B,0x12,D|T|W|R|O|M|B|K,"Medium magazine removed"}, - {0x3B,0x13,D|T|W|R|O|M|B|K,"Medium magazine inserted"}, - {0x3B,0x14,D|T|W|R|O|M|B|K,"Medium magazine locked"}, - {0x3B,0x15,D|T|W|R|O|M|B|K,"Medium magazine unlocked"}, - {0x3B,0x16,R,"Mechanical positioning or changer error"}, - {0x3D,0x00,D|T|L|P|W|R|S|O|M|C|A|E|K,"Invalid bits in identify message"}, - {0x3E,0x00,SC_ALL_DEVS,SC_LOGICAL_UNIT "has not self-configured yet"}, - {0x3E,0x01,SC_ALL_DEVS,SC_LOGICAL_UNIT "failure"}, - {0x3E,0x02,SC_ALL_DEVS,"Timeout on logical unit"}, - {0x3E,0x03,SC_ALL_DEVS,SC_LOGICAL_UNIT "failed self-test"}, - {0x3E,0x04,SC_ALL_DEVS,SC_LOGICAL_UNIT "unable to update self-test log"}, - {0x3F,0x00,SC_ALL_DEVS,"Target operating conditions have changed"}, - {0x3F,0x01,SC_ALL_DEVS,"Microcode has been changed"}, - {0x3F,0x02,D|T|L|P|W|R|S|O|M|C|B|K,"Changed operating definition"}, - {0x3F,0x03,SC_ALL_DEVS,"Inquiry data has changed"}, - {0x3F,0x04,D|T|W|R|O|M|C|A|E|B|K,"Component device attached"}, - {0x3F,0x05,D|T|W|R|O|M|C|A|E|B|K,"Device identifier changed"}, - {0x3F,0x06,D|T|W|R|O|M|C|A|E|B,"Redundancy group created or modified"}, - {0x3F,0x07,D|T|W|R|O|M|C|A|E|B,"Redundancy group deleted"}, - {0x3F,0x08,D|T|W|R|O|M|C|A|E|B,"Spare created or modified"}, - {0x3F,0x09,D|T|W|R|O|M|C|A|E|B,"Spare deleted"}, - {0x3F,0x0A,D|T|W|R|O|M|C|A|E|B|K,"Volume set created or modified"}, - {0x3F,0x0B,D|T|W|R|O|M|C|A|E|B|K,"Volume set deleted"}, - {0x3F,0x0C,D|T|W|R|O|M|C|A|E|B|K,"Volume set deassigned"}, - {0x3F,0x0D,D|T|W|R|O|M|C|A|E|B|K,"Volume set reassigned"}, - {0x3F,0x0E,D|T|L|P|W|R|S|O|M|C|A|E,"Reported luns data has changed"}, - {0x3F,0x10,D|T|W|R|O|M|B,"Medium loadable"}, - {0x3F,0x11,D|T|W|R|O|M|B,"Medium auxiliary memory accessible"}, - {0x40,0x00,D,"Ram failure (should use 40 nn)"}, - /* - * FIXME(eric) - need a way to represent wildcards here. - */ - {0x40,0x00,SC_ALL_DEVS,"Diagnostic failure on component nn (80h-ffh)"}, - {0x41,0x00,D,"Data path failure (should use 40 nn)"}, - {0x42,0x00,D,"Power-on or self-test failure (should use 40 nn)"}, - {0x43,0x00,SC_ALL_DEVS,"Message error"}, - {0x44,0x00,SC_ALL_DEVS,"Internal target failure"}, - {0x45,0x00,SC_ALL_DEVS,"Select or reselect failure"}, - {0x46,0x00,D|T|L|P|W|R|S|O|M|C|B|K,"Unsuccessful soft reset"}, - {0x47,0x00,SC_ALL_DEVS,"Scsi parity error"}, - {0x47,0x01,SC_ALL_DEVS,"Data phase CRC error detected"}, - {0x47,0x02,SC_ALL_DEVS,"Scsi parity error detected during st data phase"}, - {0x47,0x03,SC_ALL_DEVS,"Information unit CRC error detected"}, - {0x47,0x04,SC_ALL_DEVS,"Asynchronous information protection error detected"}, - {0x47,0x05,SC_ALL_DEVS,"Protocol service CRC error"}, - {0x48,0x00,SC_ALL_DEVS,"Initiator detected error message received"}, - {0x49,0x00,SC_ALL_DEVS,"Invalid message error"}, - {0x4A,0x00,SC_ALL_DEVS,"Command phase error"}, - {0x4B,0x00,SC_ALL_DEVS,"Data phase error"}, - {0x4C,0x00,SC_ALL_DEVS,SC_LOGICAL_UNIT "failed self-configuration"}, - /* - * FIXME(eric) - need a way to represent wildcards here. - */ - {0x4D,0x00,SC_ALL_DEVS,"Tagged overlapped commands (nn = queue tag)"}, - {0x4E,0x00,SC_ALL_DEVS,"Overlapped commands attempted"}, - {0x50,0x00,T,"Write append error"}, - {0x50,0x01,T,"Write append position error"}, - {0x50,0x02,T,"Position error related to timing"}, - {0x51,0x00,T|R|O,"Erase failure"}, - {0x52,0x00,T,"Cartridge fault"}, - {0x53,0x00,D|T|L|W|R|S|O|M|B|K,"Media load or eject failed"}, - {0x53,0x01,T,"Unload tape failure"}, - {0x53,0x02,D|T|W|R|O|M|B|K,"Medium removal prevented"}, - {0x54,0x00,P,"Scsi to host system interface failure"}, - {0x55,0x00,P,"System resource failure"}, - {0x55,0x01,D|O|B|K,"System buffer full"}, - {0x55,0x02,D|T|L|P|W|R|S|O|M|A|E|K,"Insufficient reservation resources"}, - {0x55,0x03,D|T|L|P|W|R|S|O|M|C|A|E,"Insufficient resources"}, - {0x55,0x04,D|T|L|P|W|R|S|O|M|A|E,"Insufficient registration resources"}, - {0x55,0x05,D|T|P|W|R|O|M|A|E|B|K,"Insufficient access control resources"}, - {0x55,0x06,D|T|W|R|O|M|B,"Auxiliary memory out of space"}, - {0x57,0x00,R,"Unable to recover table-of-contents"}, - {0x58,0x00,O,"Generation does not exist"}, - {0x59,0x00,O,"Updated block read"}, - {0x5A,0x00,D|T|L|P|W|R|S|O|M|B|K,"Operator request or state change input"}, - {0x5A,0x01,D|T|W|R|O|M|B|K,"Operator medium removal request"}, - {0x5A,0x02,D|T|W|R|O|A|B|K,"Operator selected write protect"}, - {0x5A,0x03,D|T|W|R|O|A|B|K,"Operator selected write permit"}, - {0x5B,0x00,D|T|L|P|W|R|S|O|M|K,"Log exception"}, - {0x5B,0x01,D|T|L|P|W|R|S|O|M|K,"Threshold condition met"}, - {0x5B,0x02,D|T|L|P|W|R|S|O|M|K,"Log counter at maximum"}, - {0x5B,0x03,D|T|L|P|W|R|S|O|M|K,"Log list codes exhausted"}, - {0x5C,0x00,D|O,"Rpl status change"}, - {0x5C,0x01,D|O,"Spindles synchronized"}, - {0x5C,0x02,D|O,"Spindles not synchronized"}, - {0x5D,0x00,SC_ALL_DEVS,"Failure prediction threshold exceeded"}, - {0x5D,0x01,R|B,"Media failure prediction threshold exceeded"}, - {0x5D,0x02,R,SC_LOGICAL_UNIT "failure prediction threshold exceeded"}, - {0x5D,0x03,R,"spare area exhaustion prediction threshold exceeded"}, - /* large series of "impending failure" messages */ - {0x5D,0x10,D|B,SC_HARDWARE_IF "general hard drive failure"}, - {0x5D,0x11,D|B,SC_HARDWARE_IF "drive" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x12,D|B,SC_HARDWARE_IF "data" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x13,D|B,SC_HARDWARE_IF "seek" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x14,D|B,SC_HARDWARE_IF "too many block reassigns"}, - {0x5D,0x15,D|B,SC_HARDWARE_IF "access" SC_TIMES_TOO_HIGH }, - {0x5D,0x16,D|B,SC_HARDWARE_IF "start unit" SC_TIMES_TOO_HIGH }, - {0x5D,0x17,D|B,SC_HARDWARE_IF "channel parametrics"}, - {0x5D,0x18,D|B,SC_HARDWARE_IF "controller detected"}, - {0x5D,0x19,D|B,SC_HARDWARE_IF "throughput performance"}, - {0x5D,0x1A,D|B,SC_HARDWARE_IF "seek time performance"}, - {0x5D,0x1B,D|B,SC_HARDWARE_IF "spin-up retry count"}, - {0x5D,0x1C,D|B,SC_HARDWARE_IF "drive calibration retry count"}, - {0x5D,0x20,D|B,SC_CONTROLLER_IF "general hard drive failure"}, - {0x5D,0x21,D|B,SC_CONTROLLER_IF "drive" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x22,D|B,SC_CONTROLLER_IF "data" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x23,D|B,SC_CONTROLLER_IF "seek" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x24,D|B,SC_CONTROLLER_IF "too many block reassigns"}, - {0x5D,0x25,D|B,SC_CONTROLLER_IF "access" SC_TIMES_TOO_HIGH }, - {0x5D,0x26,D|B,SC_CONTROLLER_IF "start unit" SC_TIMES_TOO_HIGH }, - {0x5D,0x27,D|B,SC_CONTROLLER_IF "channel parametrics"}, - {0x5D,0x28,D|B,SC_CONTROLLER_IF "controller detected"}, - {0x5D,0x29,D|B,SC_CONTROLLER_IF "throughput performance"}, - {0x5D,0x2A,D|B,SC_CONTROLLER_IF "seek time performance"}, - {0x5D,0x2B,D|B,SC_CONTROLLER_IF "spin-up retry count"}, - {0x5D,0x2C,D|B,SC_CONTROLLER_IF "drive calibration retry count"}, - {0x5D,0x30,D|B,SC_DATA_CHANNEL_IF "general hard drive failure"}, - {0x5D,0x31,D|B,SC_DATA_CHANNEL_IF "drive" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x32,D|B,SC_DATA_CHANNEL_IF "data" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x33,D|B,SC_DATA_CHANNEL_IF "seek" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x34,D|B,SC_DATA_CHANNEL_IF "too many block reassigns"}, - {0x5D,0x35,D|B,SC_DATA_CHANNEL_IF "access" SC_TIMES_TOO_HIGH }, - {0x5D,0x36,D|B,SC_DATA_CHANNEL_IF "start unit" SC_TIMES_TOO_HIGH }, - {0x5D,0x37,D|B,SC_DATA_CHANNEL_IF "channel parametrics"}, - {0x5D,0x38,D|B,SC_DATA_CHANNEL_IF "controller detected"}, - {0x5D,0x39,D|B,SC_DATA_CHANNEL_IF "throughput performance"}, - {0x5D,0x3A,D|B,SC_DATA_CHANNEL_IF "seek time performance"}, - {0x5D,0x3B,D|B,SC_DATA_CHANNEL_IF "spin-up retry count"}, - {0x5D,0x3C,D|B,SC_DATA_CHANNEL_IF "drive calibration retry count"}, - {0x5D,0x40,D|B,SC_SERVO_IF "general hard drive failure"}, - {0x5D,0x41,D|B,SC_SERVO_IF "drive" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x42,D|B,SC_SERVO_IF "data" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x43,D|B,SC_SERVO_IF "seek" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x44,D|B,SC_SERVO_IF "too many block reassigns"}, - {0x5D,0x45,D|B,SC_SERVO_IF "access" SC_TIMES_TOO_HIGH }, - {0x5D,0x46,D|B,SC_SERVO_IF "start unit" SC_TIMES_TOO_HIGH }, - {0x5D,0x47,D|B,SC_SERVO_IF "channel parametrics"}, - {0x5D,0x48,D|B,SC_SERVO_IF "controller detected"}, - {0x5D,0x49,D|B,SC_SERVO_IF "throughput performance"}, - {0x5D,0x4A,D|B,SC_SERVO_IF "seek time performance"}, - {0x5D,0x4B,D|B,SC_SERVO_IF "spin-up retry count"}, - {0x5D,0x4C,D|B,SC_SERVO_IF "drive calibration retry count"}, - {0x5D,0x50,D|B,SC_SPINDLE_IF "general hard drive failure"}, - {0x5D,0x51,D|B,SC_SPINDLE_IF "drive" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x52,D|B,SC_SPINDLE_IF "data" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x53,D|B,SC_SPINDLE_IF "seek" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x54,D|B,SC_SPINDLE_IF "too many block reassigns"}, - {0x5D,0x55,D|B,SC_SPINDLE_IF "access" SC_TIMES_TOO_HIGH }, - {0x5D,0x56,D|B,SC_SPINDLE_IF "start unit" SC_TIMES_TOO_HIGH }, - {0x5D,0x57,D|B,SC_SPINDLE_IF "channel parametrics"}, - {0x5D,0x58,D|B,SC_SPINDLE_IF "controller detected"}, - {0x5D,0x59,D|B,SC_SPINDLE_IF "throughput performance"}, - {0x5D,0x5A,D|B,SC_SPINDLE_IF "seek time performance"}, - {0x5D,0x5B,D|B,SC_SPINDLE_IF "spin-up retry count"}, - {0x5D,0x5C,D|B,SC_SPINDLE_IF "drive calibration retry count"}, - {0x5D,0x60,D|B,SC_FIRMWARE_IF "general hard drive failure"}, - {0x5D,0x61,D|B,SC_FIRMWARE_IF "drive" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x62,D|B,SC_FIRMWARE_IF "data" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x63,D|B,SC_FIRMWARE_IF "seek" SC_ERROR_RATE_TOO_HIGH }, - {0x5D,0x64,D|B,SC_FIRMWARE_IF "too many block reassigns"}, - {0x5D,0x65,D|B,SC_FIRMWARE_IF "access" SC_TIMES_TOO_HIGH }, - {0x5D,0x66,D|B,SC_FIRMWARE_IF "start unit" SC_TIMES_TOO_HIGH }, - {0x5D,0x67,D|B,SC_FIRMWARE_IF "channel parametrics"}, - {0x5D,0x68,D|B,SC_FIRMWARE_IF "controller detected"}, - {0x5D,0x69,D|B,SC_FIRMWARE_IF "throughput performance"}, - {0x5D,0x6A,D|B,SC_FIRMWARE_IF "seek time performance"}, - {0x5D,0x6B,D|B,SC_FIRMWARE_IF "spin-up retry count"}, - {0x5D,0x6C,D|B,SC_FIRMWARE_IF "drive calibration retry count"}, - {0x5D,0xFF,SC_ALL_DEVS,"Failure prediction threshold exceeded (false)"}, - {0x5E,0x00,D|T|L|P|W|R|S|O|C|A|K,"Low power condition on"}, - {0x5E,0x01,D|T|L|P|W|R|S|O|C|A|K,"Idle condition activated by timer"}, - {0x5E,0x02,D|T|L|P|W|R|S|O|C|A|K,"Standby condition activated by timer"}, - {0x5E,0x03,D|T|L|P|W|R|S|O|C|A|K,"Idle condition activated by command"}, - {0x5E,0x04,D|T|L|P|W|R|S|O|C|A|K,"Standby condition activated by command"}, - {0x5E,0x41,B,"Power state change to active"}, - {0x5E,0x42,B,"Power state change to idle"}, - {0x5E,0x43,B,"Power state change to standby"}, - {0x5E,0x45,B,"Power state change to sleep"}, - {0x5E,0x47,B|K,"Power state change to device control"}, - {0x60,0x00,S,"Lamp failure"}, - {0x61,0x00,S,"Video acquisition error"}, - {0x61,0x01,S,"Unable to acquire video"}, - {0x61,0x02,S,"Out of focus"}, - {0x62,0x00,S,"Scan head positioning error"}, - {0x63,0x00,R,"End of user area encountered on this track"}, - {0x63,0x01,R,"Packet does not fit in available space"}, - {0x64,0x00,R,"Illegal mode for this track"}, - {0x64,0x01,R,"Invalid packet size"}, - {0x65,0x00,SC_ALL_DEVS,"Voltage fault"}, - {0x66,0x00,S,"Automatic document feeder cover up"}, - {0x66,0x01,S,"Automatic document feeder lift up"}, - {0x66,0x02,S,"Document jam in automatic document feeder"}, - {0x66,0x03,S,"Document miss feed automatic in document feeder"}, - {0x67,0x00,A,"Configuration failure"}, - {0x67,0x01,A,"Configuration of incapable logical units failed"}, - {0x67,0x02,A,"Add logical unit failed"}, - {0x67,0x03,A,"Modification of logical unit failed"}, - {0x67,0x04,A,"Exchange of logical unit failed"}, - {0x67,0x05,A,"Remove of logical unit failed"}, - {0x67,0x06,A,"Attachment of logical unit failed"}, - {0x67,0x07,A,"Creation of logical unit failed"}, - {0x67,0x08,A,"Assign failure occurred"}, - {0x67,0x09,A,"Multiply assigned logical unit"}, - {0x67,0x0A,SC_ALL_DEVS,"Set target port groups command failed"}, - {0x68,0x00,A,SC_LOGICAL_UNIT "not configured"}, - {0x69,0x00,A,"Data loss on logical unit"}, - {0x69,0x01,A,"Multiple logical unit failures"}, - {0x69,0x02,A,"Parity/data mismatch"}, - {0x6A,0x00,A,"Informational,refer to log"}, - {0x6B,0x00,A,"State change has occurred"}, - {0x6B,0x01,A,"Redundancy level got better"}, - {0x6B,0x02,A,"Redundancy level got worse"}, - {0x6C,0x00,A,"Rebuild failure occurred"}, - {0x6D,0x00,A,"Recalculate failure occurred"}, - {0x6E,0x00,A,"Command to logical unit failed"}, - {0x6F,0x00,R,"Copy protection key exchange failure - authentication failure"}, - {0x6F,0x01,R,"Copy protection key exchange failure - key not present"}, - {0x6F,0x02,R,"Copy protection key exchange failure - key not established"}, - {0x6F,0x03,R,"Read of scrambled sector without authentication"}, - {0x6F,0x04,R,"Media region code is mismatched to logical unit region"}, - {0x6F,0x05,R,"Drive region must be permanent/region reset count error"}, - /* - * FIXME(eric) - need a way to represent wildcards here. - */ - {0x70,0x00,T,"Decompression exception short algorithm id of nn"}, - {0x71,0x00,T,"Decompression exception long algorithm id"}, - {0x72,0x00,R,"Session fixation error"}, - {0x72,0x01,R,"Session fixation error writing lead-in"}, - {0x72,0x02,R,"Session fixation error writing lead-out"}, - {0x72,0x03,R,"Session fixation error - incomplete track in session"}, - {0x72,0x04,R,"Empty or partially written reserved track"}, - {0x72,0x05,R,"No more track reservations allowed"}, - {0x73,0x00,R,"Cd control error"}, - {0x73,0x01,R,"Power calibration area almost full"}, - {0x73,0x02,R,"Power calibration area is full"}, - {0x73,0x03,R,"Power calibration area error"}, - {0x73,0x04,R,"Program memory area update failure"}, - {0x73,0x05,R,"Program memory area is full"}, - {0x73,0x06,R,"RMA/PMA is full"}, - {0, 0, 0, NULL} -}; - -static const char * sc_oft_used[0x1f] = { - "umulig", /* index 0x0 should be impossible */ - "Audio play operation ", - "Logical unit ", - "not ready, ", - " operation", - " in progress ", - "Hardware impending failure ", - "Controller impending failure ", - "Data channel impending failure ", /* index 0x8 */ - "Servo impending failure ", - "Spindle impending failure ", - "Firmware impending failure ", - "Recovered data ", - " error rate too high", - " times too high", -}; - -static const char *snstext[] = { - "No Sense", /* There is no sense information */ - "Recovered Error", /* The last command completed successfully - but used error correction */ - "Not Ready", /* The addressed target is not ready */ - "Medium Error", /* Data error detected on the medium */ - "Hardware Error", /* Controller or device failure */ - "Illegal Request", - "Unit Attention", /* Removable medium was changed, or - the target has been reset */ - "Data Protect", /* Access to the data is blocked */ - "Blank Check", /* Reached unexpected written or unwritten - region of the medium */ - "Key=9", /* Vendor specific */ - "Copy Aborted", /* COPY or COMPARE was aborted */ - "Aborted Command", /* The target aborted the command */ - "Equal", /* SEARCH DATA found data equal (obsolete) */ - "Volume Overflow", /* Medium full with still data to be written */ - "Miscompare", /* Source data and data on the medium - do not agree */ - "Key=15" /* Reserved */ -}; - -static -void sg_print_asc_ascq(unsigned char asc, unsigned char ascq) -{ - int k, j; - char obuff[256]; - const char * ccp; - const char * oup; - char c; - int found = 0; - - for (k=0; additional[k].text; k++) { - if (additional[k].code1 == asc && - additional[k].code2 == ascq) { - found = 1; - ccp = additional[k].text; - for (j = 0; *ccp && (j < sizeof(obuff)); ++ccp) { - c = *ccp; - if ((c < 0x20) && (c > 0)) { - oup = sc_oft_used[(int)c]; - if (oup) { - strcpy(obuff + j, oup); - j += strlen(oup); - } - else { - strcpy(obuff + j, "???"); - j += 3; - } - } - else - obuff[j++] = c; - } - if (j < sizeof(obuff)) - obuff[j] = '\0'; - else - obuff[sizeof(obuff) - 1] = '\0'; - fprintf(OUTP, "Additional sense: %s\n", obuff); - } - } - if (found) - return; - - for(k=0; additional2[k].text; k++) { - if ((additional2[k].code1 == asc) && - (ascq >= additional2[k].code2_min) && - (ascq <= additional2[k].code2_max)) { - found = 1; - fprintf(OUTP, "Additional sense: "); - fprintf(OUTP, additional2[k].text, ascq); - fprintf(OUTP, "\n"); - } - } - if (! found) - fprintf(OUTP, "ASC=%2x ASCQ=%2x\n", asc, ascq); -} - -/* Print sense information */ -void sg_print_sense(const char * leadin, const unsigned char * sense_buffer, - int sb_len) -{ - int k, s; - int sense_key, sense_class, valid, code; - int descriptor_format = 0; - const char * error = NULL; - - if (sb_len < 1) { - fprintf(OUTP, "sense buffer empty\n"); - return; - } - sense_class = (sense_buffer[0] >> 4) & 0x07; - code = sense_buffer[0] & 0xf; - valid = sense_buffer[0] & 0x80; - if (leadin) - fprintf(OUTP, "%s: ", leadin); - - if (sense_class == 7) { /* extended sense data */ - s = sense_buffer[7] + 8; - if(s > sb_len) /* device has more available which we ignore */ - s = sb_len; - - switch (code) { - case 0x0: - error = "Current"; /* error concerns current command */ - break; - case 0x1: - error = "Deferred"; /* error concerns some earlier command */ - /* e.g., an earlier write to disk cache succeeded, but - now the disk discovers that it cannot write the data */ - break; - case 0x2: - descriptor_format = 1; - error = "Descriptor current"; - /* new descriptor sense format */ - break; - case 0x3: - descriptor_format = 1; - error = "Descriptor deferred"; - /* new descriptor sense format (deferred report) */ - break; - default: - error = "Invalid"; - } - sense_key = sense_buffer[ descriptor_format ? 1 : 2 ] & 0xf; - fprintf(OUTP, "%s, Sense key: %s\n", error, snstext[sense_key]); - - if (descriptor_format) - sg_print_asc_ascq(sense_buffer[2], sense_buffer[3]); - else { - if (!valid) - fprintf(OUTP, "[valid=0] "); - fprintf(OUTP, "Info fld=0x%x, ", (int)((sense_buffer[3] << 24) | - (sense_buffer[4] << 16) | (sense_buffer[5] << 8) | - sense_buffer[6])); - - if (sense_buffer[2] & 0x80) - fprintf(OUTP, "FMK "); /* current command has read a filemark */ - if (sense_buffer[2] & 0x40) - fprintf(OUTP, "EOM "); /* end-of-medium condition exists */ - if (sense_buffer[2] & 0x20) - fprintf(OUTP, "ILI "); /* incorrect block length requested */ - - if (s > 13) { - if (sense_buffer[12] || sense_buffer[13]) - sg_print_asc_ascq(sense_buffer[12], sense_buffer[13]); - } - if (sense_key == 5 && s >= 18 && (sense_buffer[15]&0x80)) { - fprintf(OUTP, "Sense Key Specific: Error in %s byte %d", - (sense_buffer[15]&0x40)?"Command":"Data", - (sense_buffer[16]<<8)|sense_buffer[17]); - if(sense_buffer[15]&0x08) { - fprintf(OUTP, " bit %d\n", sense_buffer[15]&0x07); - } else { - fprintf(OUTP, "\n"); - } - } - } - - } else { /* non-extended sense data */ - - /* - * Standard says: - * sense_buffer[0] & 0200 : address valid - * sense_buffer[0] & 0177 : vendor-specific error code - * sense_buffer[1] & 0340 : vendor-specific - * sense_buffer[1..3] : 21-bit logical block address - */ - - if (sb_len < 4) { - fprintf(OUTP, "sense buffer too short (4 byte minimum)\n"); - return; - } - if (leadin) - fprintf(OUTP, "%s: ", leadin); - if (sense_buffer[0] < 15) - fprintf(OUTP, - "old sense: key %s\n", snstext[sense_buffer[0] & 0x0f]); - else - fprintf(OUTP, "sns = %2x %2x\n", sense_buffer[0], sense_buffer[2]); - - fprintf(OUTP, "Non-extended sense class %d code 0x%0x ", - sense_class, code); - s = 4; - } - - fprintf(OUTP, "Raw sense data (in hex):\n "); - for (k = 0; k < s; ++k) { - if ((k > 0) && (0 == (k % 24))) - fprintf(OUTP, "\n "); - fprintf(OUTP, "%02x ", sense_buffer[k]); - } - fprintf(OUTP, "\n"); -} - -static const char * hostbyte_table[]={ -"DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", -"DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", -"DID_PASSTHROUGH", "DID_SOFT_ERROR", NULL}; - -void sg_print_host_status(int host_status) -{ static int maxcode=0; - int i; - - if(! maxcode) { - for(i = 0; hostbyte_table[i]; i++) ; - maxcode = i-1; - } - fprintf(OUTP, "Host_status=0x%02x", host_status); - if(host_status > maxcode) { - fprintf(OUTP, "is invalid "); - return; - } - fprintf(OUTP, "(%s) ",hostbyte_table[host_status]); -} - -static const char * driverbyte_table[]={ -"DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR", -"DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE", NULL}; - -static const char * driversuggest_table[]={"SUGGEST_OK", -"SUGGEST_RETRY", "SUGGEST_ABORT", "SUGGEST_REMAP", "SUGGEST_DIE", -unknown,unknown,unknown, "SUGGEST_SENSE",NULL}; - - -void sg_print_driver_status(int driver_status) -{ - static int driver_max =0 , suggest_max=0; - int i; - int dr = driver_status & SG_ERR_DRIVER_MASK; - int su = (driver_status & SG_ERR_SUGGEST_MASK) >> 4; - - if(! driver_max) { - for(i = 0; driverbyte_table[i]; i++) ; - driver_max = i; - for(i = 0; driversuggest_table[i]; i++) ; - suggest_max = i; - } - fprintf(OUTP, "Driver_status=0x%02x",driver_status); - fprintf(OUTP, " (%s,%s) ", - dr < driver_max ? driverbyte_table[dr]:"invalid", - su < suggest_max ? driversuggest_table[su]:"invalid"); -} - -static int sg_sense_print(const char * leadin, int scsi_status, - int host_status, int driver_status, - const unsigned char * sense_buffer, int sb_len) -{ - int done_leadin = 0; - int done_sense = 0; - - scsi_status &= 0x7e; /*sanity */ - if ((0 == scsi_status) && (0 == host_status) && - (0 == driver_status)) - return 1; /* No problems */ - if (0 != scsi_status) { - if (leadin) - fprintf(OUTP, "%s: ", leadin); - done_leadin = 1; - fprintf(OUTP, "scsi status: "); - sg_print_scsi_status(scsi_status); - fprintf(OUTP, "\n"); - if (sense_buffer && ((scsi_status == SCSI_CHECK_CONDITION) || - (scsi_status == SCSI_COMMAND_TERMINATED))) { - sg_print_sense(0, sense_buffer, sb_len); - done_sense = 1; - } - } - if (0 != host_status) { - if (leadin && (! done_leadin)) - fprintf(OUTP, "%s: ", leadin); - if (done_leadin) - fprintf(OUTP, "plus...: "); - else - done_leadin = 1; - sg_print_host_status(host_status); - fprintf(OUTP, "\n"); - } - if (0 != driver_status) { - if (leadin && (! done_leadin)) - fprintf(OUTP, "%s: ", leadin); - if (done_leadin) - fprintf(OUTP, "plus...: "); - else - done_leadin = 1; - sg_print_driver_status(driver_status); - fprintf(OUTP, "\n"); - if (sense_buffer && (! done_sense) && - (SG_ERR_DRIVER_SENSE == (0xf & driver_status))) - sg_print_sense(0, sense_buffer, sb_len); - } - return 0; -} - -#ifdef SG_IO -int sg_chk_n_print3(const char * leadin, struct sg_io_hdr * hp) -{ - return sg_sense_print(leadin, hp->status, hp->host_status, - hp->driver_status, hp->sbp, hp->sb_len_wr); -} -#endif - -int sg_chk_n_print(const char * leadin, int masked_status, - int host_status, int driver_status, - const unsigned char * sense_buffer, int sb_len) -{ - int scsi_status = (masked_status << 1) & 0x7e; - - return sg_sense_print(leadin, scsi_status, host_status, driver_status, - sense_buffer, sb_len); -} - -#ifdef SG_IO -int sg_err_category3(struct sg_io_hdr * hp) -{ - return sg_err_category_new(hp->status, hp->host_status, - hp->driver_status, hp->sbp, hp->sb_len_wr); -} -#endif - -int sg_err_category(int masked_status, int host_status, - int driver_status, const unsigned char * sense_buffer, - int sb_len) -{ - int scsi_status = (masked_status << 1) & 0x7e; - - return sg_err_category_new(scsi_status, host_status, driver_status, - sense_buffer, sb_len); -} - -int sg_err_category_new(int scsi_status, int host_status, int driver_status, - const unsigned char * sense_buffer, int sb_len) -{ - scsi_status &= 0x7e; - if ((0 == scsi_status) && (0 == host_status) && - (0 == driver_status)) - return SG_ERR_CAT_CLEAN; - if ((SCSI_CHECK_CONDITION == scsi_status) || - (SCSI_COMMAND_TERMINATED == scsi_status) || - (SG_ERR_DRIVER_SENSE == (0xf & driver_status))) { - if (sense_buffer && (sb_len > 2)) { - int sense_key; - unsigned char asc; - - if (sense_buffer[0] & 0x2) { - sense_key = sense_buffer[1] & 0xf; - asc = sense_buffer[2]; - } - else { - sense_key = sense_buffer[2] & 0xf; - asc = (sb_len > 12) ? sense_buffer[12] : 0; - } - - if(RECOVERED_ERROR == sense_key) - return SG_ERR_CAT_RECOVERED; - else if (UNIT_ATTENTION == sense_key) { - if (0x28 == asc) - return SG_ERR_CAT_MEDIA_CHANGED; - if (0x29 == asc) - return SG_ERR_CAT_RESET; - } - } - return SG_ERR_CAT_SENSE; - } - if (0 != host_status) { - if ((SG_ERR_DID_NO_CONNECT == host_status) || - (SG_ERR_DID_BUS_BUSY == host_status) || - (SG_ERR_DID_TIME_OUT == host_status)) - return SG_ERR_CAT_TIMEOUT; - } - if (0 != driver_status) { - if (SG_ERR_DRIVER_TIMEOUT == driver_status) - return SG_ERR_CAT_TIMEOUT; - } - return SG_ERR_CAT_OTHER; -} - -int sg_get_command_size(unsigned char opcode) -{ - return COMMAND_SIZE(opcode); -} - -void sg_get_command_name(unsigned char opcode, int buff_len, char * buff) -{ - const char **table = commands[ group(opcode) ]; - - if ((NULL == buff) || (buff_len < 1)) - return; - - switch ((unsigned long) table) { - case RESERVED_GROUP: - strncpy(buff, reserved, buff_len); - break; - case VENDOR_GROUP: - strncpy(buff, vendor, buff_len); - break; - default: - strncpy(buff, table[opcode & 0x1f], buff_len); - break; - } -}